The production process consists of the following activities:
1) Preparation of Paper rope,
2) Preparation of product design,
3) Making a wooden frame / wicker,
4) manufacture of furniture with woven straps on the frame of the paper;
5) the final
6) packing
1) Preparation of Paper rope,
2) Preparation of product design,
3) Making a wooden frame / wicker,
4) manufacture of furniture with woven straps on the frame of the paper;
5) the final
6) packing
The picture of production process
1) Kertas (Kraft)
2) Dipotong (Cutting)
3) Diplintir (Twisting)
4) Dianyam (Weaving)
5) Produk Jadi (Finished Product)
Rope for this paper made by means of manual assisted by player machines (drilling machine) as pemlintir. Newsprint, cement and paper or craft paper mill waste is cut into pieces as wide as 5 cm and length up to 13 m (depending on paper type), then the waste piece of paper twisted into a solid rope.
Framework of the products manufactured according to design requirements and followed by drying. Framework of the drying process the product, made with the help of sunlight and placed in the vicinity of production (see Figure A3).
The next process is to combine the frame with straps of paper materials. Woven paper rope in the frame is made either directly or webbing block first. Matting process is done manually with a tool and hammer nails or staples machine.
The next process is to combine the frame with straps of paper materials. Woven paper rope in the frame is made either directly or webbing block first. Matting process is done manually with a tool and hammer nails or staples machine.
The process of SMEs 1
Spinning process waste paper into the paper carried a rope in the village of Karangjati, Boyolali located deep (approximately 20 km) from the manufacture of furniture in the village of Ds. Trangsan, Gatak Sukoharjo. The distance is due to the consideration of the utilization of available human resources in Boyolali. Process lay-out of production using the rules of the block, wherein each groove running in a sequential process (raw materials - design - framework forms - woven fiber - raft-finishing). Some rooms ddipergunakan to meet the needs of the production flow. The room is like a pre-production (raw material manufacturing space covering an area of 100m2), woven space (an area of 100m2), production assembly space (an area of 250m2), warehouses (covering an area of 1000m2) and showrooms (an area of 60m2).
0 komentar:
Posting Komentar